TPO Mini ExplainerReturn to the news

TPO Explains

Pass the Plane

The picture

Air traffic control works like a set of nested maps. Start with the whole country, then zoom in.

ATCSCCOne command center watching the whole map
Map of the 21 Air Route Traffic Control Center zones: 20 over the lower 48 states and one over Alaska. Chicago Center, ZAU, is highlighted.Albuquerque Center (ZAB)Chicago Center (ZAU)Boston Center (ZBW)Washington Center (ZDC)Denver Center (ZDV)Fort Worth Center (ZFW)Houston Center (ZHU)Indianapolis Center (ZID)Jacksonville Center (ZJX)Kansas City Center (ZKC)Los Angeles Center (ZLA)Salt Lake City Center (ZLC)Miami Center (ZMA)Memphis Center (ZME)Minneapolis Center (ZMP)New York Center (ZNY)Oakland Center (ZOA)Cleveland Center (ZOB)Seattle Center (ZSE)Atlanta Center (ZTL)Anchorage Center (ZAN)

21 Centers handle en route traffic: 20 over the lower 48 and one over Alaska. Every Center's code starts with a Z.2,8

Zooming in on Chicago Center ↓

ARTCCOne Center's zone1 of 21
Close-up of Chicago Center's zone, with a TRACON ring drawn around the Chicago area.TRACONZAU

Inside each zone, TRACONs handle the busier airspace around airports. Ring drawn for illustration, not to scale.3

Zooming in on one TRACON ↓

TRACON~50 miles of airspace
Illustration of one TRACON's airspace as a radar scope, with three airports inside, each with its own control tower. ATCT ATCT ATCT

One TRACON can cover several airports, and each busy airport has its own tower.3

Acronym cheat sheet

ATCSCCAir Traffic Control System Command CenterThe one command center overseeing all U.S. airspace.1, in Warrenton, Virginia1
ARTCCAir Route Traffic Control CenterThe control center for each of the 21 zones.21 nationwide2
TRACONTerminal Radar Approach ControlControls a ~50 mile portion of airspace. Can oversee multiple airports.3146 nationwide2
ATCTAirport Traffic Control TowerAn airport's own tower. Most major airports have one.527 nationwide4

The journey

Follow one flight from gate to gate. Tap a stop to see who is in charge.

Tap a stop, or use the buttons below.

Stop 1 of 7At the gate

Clearance: Permission to Plan

Before pushing back, the pilot gets an ATC clearance: the official OK to fly a set route at set altitudes.7 Busy airports have a clearance delivery controller just for this; elsewhere, ground control relays it.6

ATC also assigns a transponder code, called a squawk, that helps radar keep tabs on the plane.5

Next up: ground control, for the taxi.

Stop 2 of 7On the taxiway

Ground: Traffic Cops on Wheels

Ground control directs planes rolling along the taxiways toward the runway.

It gets its own radio frequency so the tower's channel stays clear for takeoffs and landings.6

Next up: the ATCT (tower), once the pilot is ready to go.6

Stop 3 of 7On the runway

Tower: Cleared for Takeoff

The tower's local controller owns the runways.6 Tower controllers set the order of departing and arriving planes, then give the go to take off.7

Next up: once airborne, the tower tells the pilot to contact departure control.5

Stop 4 of 7Climbing out

Departure: The Climb Crew

A TRACON picks up climbing flights from the tower and guides them up and away from the airport's busy airspace.2

Next up: an ARTCC (Center), for the cruise.

Stop 5 of 7Cruising

Center: The Long Haul

Centers handle flights on instrument flight plans during the en route phase, the long middle of the trip.5

On the map above, that is one of the 21 Z zones.2

Next up: another TRACON, near the destination.2

Stop 6 of 7Descending

Approach: Lining Up

Near the destination, a TRACON takes the descending flight from the Center and lines it up with other arrivals.2

Next up: approach control tells the pilot to contact the tower for landing.5

Stop 7 of 7Wheels down

Landing: Back Where We Started

The tower clears the plane to land. After touchdown, the pilot stays with the tower until told to switch to ground control.6

Ground then guides the plane to the gate. Baton passed, trip complete.

When storms or crowds hit

You're Grounded:
When Command Hits Pause

Sometimes the sky has more planes than it can handle. That's when the ATCSCC steps in to balance traffic with what the system can take, from a gentle nudge all the way up to keeping planes on the ground.1

Reroutes

Sending flights around a crowded or stormy patch of sky.1,9

Miles in trail

Spacing planes out in line, a set number of miles apart.1

Ground delay program

Holding planes at their departure gates and giving each a time slot to arrive, so they wait on the ground instead of circling in the air.9

The full grounding

Ground stop

Certain planes, like every departure headed to one airport, must stay put on the ground. It overrides every other tool, often comes with little or no warning, and planes can't leave until whoever issued it says so.9

Sources

  1. Federal Aviation Administration. "Air Traffic Control System Command Center (ATCSCC)." Updated Jan. 4, 2024. faa.gov
  2. Federal Aviation Administration. "Air Traffic by the Numbers, FY2024." June 2025. faa.gov (PDF)
  3. SKYbrary. "Terminal Radar Approach Control (TRACON)." skybrary.aero
  4. Federal Aviation Administration. "Air Traffic By the Numbers." Accessed Nov. 20, 2026. faa.gov
  5. Federal Aviation Administration. Aeronautical Information Manual, Chapter 4, Section 1: "Services Available to Pilots." faa.gov
  6. Federal Aviation Administration. Aeronautical Information Manual, Chapter 4, Section 3: "Airport Operations." faa.gov
  7. Federal Aviation Administration. Aeronautical Information Manual, Chapter 4, Section 4: "ATC Clearances and Aircraft Separation." faa.gov
  8. Federal Aviation Administration. "Boundary Airspace" (ARTCC boundaries), Aeronautical Data Delivery Service. Accessed Nov. 20, 2026. Map drawn from this data. adds-faa.opendata.arcgis.com
  9. Federal Aviation Administration. Aeronautical Information Publication, ENR 1.9: "Air Traffic Flow Management and Airspace Management." faa.gov
Return to the news